JMP SKAN Lithium Battery Charger +. Featuring a heat-resistant, waterproof nylon case and improved terminal connections. Skyrich advanced Battery Management System (BMS), in addition to the balancers (ensures even charging/discharging of the battery), also includes overcharge protection. This prevents the battery from being charged with a voltage of over 14.9V. Integrated overvoltage protection and battery status indicator.1/3 of the weight of the comparable lead-acid battery. Improved brass terminals for best conductivity. Black nylon battery housing - deformation due to heat is practically impossible. Can be installed in any position as it contains no acid. Balanced discharge/charge of all cells by balancer. Fast charge possible with high charge current (up to 90% in 6 min). Still good performance at high temperatures up to 60°C. Starting capacity down to -5 degrees Celsius.
Safe technology and long service life. Skyrich lithium-ion batteries use iron phosphate (LiFePO4) as the cathode material and use the lithium polymer process in their manufacture. This prevents them from bursting into flames or exploding during normal operation. The technology and manufacturing process ensure the highest safety standard for lithium batteries. Cold Cranking Amps (CCA): 240 A.
Replaces the following battery types. JMP Skan Lithium Ion Charger. Microprocessor-controlled high-tech battery charger of the latest generation with 8 charging levels.Both for quick charging of a battery and for long-term maintenance trickle charging, for example when hibernating vehicles. For batteries from 2 Ah to 50 Ah. Low voltage detection: 0.7 V. Overcharge protection, reverse polarity protection. Splash and dust proof (IP65). Dimensions: 180 x 80 x 40 mm.
Connection cable: 2.10 m. Simply hook up to the battery and route the quick connect weatherproof plug to an easily accessible point on your motorcycle, allowing rapid connect/disconnect from charge along with a permanently displayed current battery status. Yellow: Please recharge the battery. Red: Charge the battery immediately.Robust and waterproof connector for extreme environments. Protected with an additional 10A fuse. JMP Skan 1.0 charger unit.
Supplied with power plug for UK sockets only. Adapter cable with eyelets for permanent connection to the battery.We have an extensive catalogue of parts available for your motorcycle, all of which are backed up by our friendly & knowledgeable team who are on hand to assist with any queries you might have. If we have any problems with your order, we will let you know as soon as possible. Independent UK Business passionate about motorcycles and providing outstanding customer service. We post directly from our UK address. Fast and helpful customer service. High quality spares & parts at affordable prices.